LTE Rejection Notch Filter for removing intering frequencies (LTE 4G)

OBF4LTE should be inserted into the input of the reception system before any amplifiers, active devices or receivers to exclude interfering signals from the whole network. Where the interfering signals are very strong, additional filtering may be necessary especially where it is received directly onto the coaxial cables / flyleads.

  • Four tuned filters for <45dB rejection of a single frequency.
  • Pre-tuned to 802MHz ~ 818MHz frequency centres for the rejection of LTE downlink frequencies
  • Fully screened outdoor / indoor housing with mast or bulkhead fixing
Model: OBF4LTE
Pass-Band: 5MHz ~ 790MHz
Stop-Band: 791MHz ~ 862MHz
Insertion Loss in Pass-Band: <0.5dB typical : Maximum <4dB at Pass-Band Edge (786MHz Ch60)
Maximum Insertion Loss in Stop-Band: >45dB typical up to 55dB
DC Pass: 12V 500mA
Connectors: F female
Housing: Fully Screened Metal Module in ABS weatherproof mast/bulkhead housing. Mast fixing ties included
Dimensions: 107 x 95 x 30mm
Weight: 0.200kg

Note: OBF4LTE is factory tuned for accuracy in frequency pass and stop-band rejection. Other bespoke filter frequencies are available. Please contact your aerial wholesaler or fill in our contact form.

Keep in touch

Redbourne Park, Liliput Road,

Brackmills Industrial Estate NN4 7DT

  •   01604 662748

© Optima™ 2006-2017. Reproduction prohibited. All specifications and details are for guidance only, are correct at time of going to print, and are subject to change. Check details before purchase and use. Images are for illustration only and some products may vary from those shown. Errors & Omissions Excepted

Shoe Site Website website Site